| Name | Fire Alarm Control Panel-1 |
|---|---|
| Type | Fire Alarm Control Panel |
| Description | Fire Alarm Control Panel: 16x19 |
| Location | 123 |
| Serial Number | n/a |
| Installation Date | 2019-08-26 |
| Warranty Start Date | 2019-10-01 |
| Tag Number | n/a |
| BarCode | n/a |
| Asset ID | Fire Alarm Control Panel-123-Fire Alarm Control Panel-1 |
| F.A. Depth | 138.4102 mm | n/a |
|---|---|---|
| Notes | n/a | n/a |
| Panel Name | FACP-01 | n/a |
| Voltage | 220 V | n/a |
| Step | Description | Expected Duration |
| 1 | This equipment should be maintained in accordance with the regulations and codes appropriate to the country and location of installation. The following is recommended if no other regulations apply. | 15.0 minute |
| 2 | The service / maintenance contractor should perform the following checks and actions: | 15.0 minute |
| 3 | Perform the checks as recommended above in the daily, monthly and quarterly schedules. | 15.0 minute |
| 4 | Perform a complete “Walk Test” of the system to check that each call point and detector is operating to its manufacturers’ specification. | 15.0 minute |
| 5 | Visually inspect all cable fittings. Check that the equipment is undamaged and that the conditions of installation have not changed such that they fall outside of the equipment specifications. | 15.0 minute |
| 6 | Inspect and test all batteries and replace as required – refer to Section 4.2 for recommended replacement schedule. | 15.0 minute |
| 7 | Record in the logbook any defects or remedial actions that must be undertaken and arrange for these to be carried out as soon as possible. | 15.0 minute |
| Step | Description | Expected Duration |
| 1 | This equipment should be maintained in accordance with the regulations and codes appropriate to the country and location of installation. The following is recommended if no other regulations apply. | 15.0 minute |
| 2 | The site operator / user should perform the following checks and actions: | 15.0 minute |
| 3 | The panel indicates normal operation. If any faults exist, these should be recorded in a logbook. | 15.0 minute |
| 4 | Any recorded faults have received attention and have been signed off. | 15.0 minute |
| Step | Description | Expected Duration |
| 1 | This equipment should be maintained in accordance with the regulations and codes appropriate to the country and location of installation. The following is recommended if no other regulations apply. | 15.0 minute |
| 2 | The site operator / user should perform the following checks and actions: | 15.0 minute |
| 3 | Any stand-by generators should be started and fuel levels checked. | 15.0 minute |
| 4 | Operate at least one call point or detector (from different zones each month) and check that the panel enters a fire alarm condition and that the appropriate / programmed alarm or warning devices are sounded /operated. Where permissible, this should include any links to the fire brigade or remote centre. | 15.0 minute |
| 5 | Check that all outstanding faults have been recorded and have received attention. | 15.0 minute |
| Step | Description | Expected Duration |
| 1 | This equipment should be maintained in accordance with the regulations and codes appropriate to the country and location of installation. The following is recommended if no other regulations apply. | 15.0 minute |
| 2 | The service / maintenance contractor should perform the following checks and actions: | 15.0 minute |
| 3 | Check that all entries in the logbook have been addressed, check the event log in the panel and take the necessary remedial actions. | 15.0 minute |
| 4 | Visually inspect the panel for any moisture ingress or other deterioration, check all battery connections and test / check the alarm, fault and other functions of the panel operation. | 15.0 minute |
| 5 | Ascertain if any building or structural alterations have been carried out that would affect the placement /location of call points or detectors. If so, perform a visual inspection. | 15.0 minute |
| 6 | Record in the logbook any defects or remedial actions that must be undertaken and arrange for these to be carried out as soon as possible. | 15.0 minute |
| Guarantor Parts | info@ses-ltd.co.uk |
|---|---|
| Duration Parts | 1.0 year |
| Guarantor Labor | info@ses-ltd.co.uk |
| Duration Labor | 1.0 year |
| WarrantyDescription | Standard one-year "call back" warranty |
| Name | Fire Alarm Control Panel |
|---|---|
| Category | Pr_60_70_22 : Distribution boxes and switchboards |
| Description | Fire Alarm Control Panel_16x19 |
| Asset Type | Fixed |
| Manufacturer | enquiries@advancedco.com |
| Model Number | MX-5400 (video search) |
| Reference | 26 24 19 00 40 - MOTOR CONTROL CENTERS 08/10 |
| F.A. Height | 475 mm | n/a |
|---|---|---|
| F.A.Width | 400 mm | n/a |
| Keynote | 28 31 23.A | n/a |
| Name | Description | Stage | Type |
|---|---|---|---|
| Warranty Certificate | Fire Alarm Control Panel_16x19 | Requirement | Certificates |
| Installation Instructions | Fire Alarm Control Panel_16x19 | Requirement | Manufacturer Instructions |
| Operations and Maintenance Instructions | O&M Data | Submitted | Operation and Maintenance |
| Replacement Parts | Fire Alarm Control Panel_16x19 | Submitted | Parts |
| Internet Connection Gateway | Fire Alarm Control Panel_16x19 | Submitted | Product Data |
| Product Data | Fire Alarm Control Panel_16x19 | Submitted | Product Data |
| Programmable 4-Way Relay Card | Fire Alarm Control Panel_16x19 | Submitted | Product Data |
| Routing Interface Card | Fire Alarm Control Panel_16x19 | Submitted | Product Data |
| Software | Fire Alarm Control Panel_16x19 | Submitted | Product Data |
| Name | Description | Stage | Type |
|---|---|---|---|
| Photo229 | Simulated Site Photos | As Built | Photos |