| Task | Description | Duration |
|---|
| 1 | A qualified electrician, in accordance with IEE wiring regulations, should carry out the connection to the mains wiring. | 0 minutes |
| 2 | Ensure that the rated voltage and the frequency requirements are compatible with the available mains supply. | 0 minutes |
| 3 | This luminaire must be earthed. | 0 minutes |
| 4 | Observe ESD precautions during installation. | 0 minutes |
| 5 | The Luminaire must be isolated before commencing any necessary maintenance work or emergency battery connection. | 0 minutes |
| 6 | Do not carry out a high voltage insulation test, i.e. 500/1000v this may damage internal components. | 0 minutes |
| 7 | The light source within this luminaire shall only be replaced by the manufacturer, their agent, or a suitably qualified person. | 0 minutes |
| 8 | Batteries used in emergency versions of this luminaire range are replaceable by a qualified electrician only. | 15 minutes |
| 9 | Dali control cables must be double insulated & have an equivalent insulation rating to the supply cable. | 0 minutes |
| 10 | Ensure that the ceiling is of sufficient strength to support the luminaire weight. Fit secondary suspensions where necessary. | 0 minutes |
| 11 | It is recommended that a minimum of two people undertake the installation of luminaires. | 0 minutes |