| Task | Description | Duration |
|---|
| 1 | Switch off the MCB: Naturally, most people recognize the dangers of using a soaked cloth or a spray solution on a live circuit. To solve this, switch off theminiature circuit breakerof the room your outlet is in. This removes the fatal risk involved in the process. | 2 minutes |
| 2 | Remove the Plates: Use the appropriate screwdriver to remove the switch plates as well as the outlet cover plates. This will expose the concealed electrical box and receptacle for cleaning. But you might want to still check if the circuit is dead. You can further confirm its inactivity by using a non-contact electrical voltage tester. | 2 minutes |
| 3 | Prepare a Cleaning Solution: There is a bevy of liquid cleaning solutions one can prepare at home. Before you prepare one, look up OEM recommendations for the electrical outlet, electrical receptacle, and concealed electrical box, to find out which compounds are damaging to the plate material (usually polycarbonate plastic). You could use a home vinegar solution, window cleaner, or detergent mixed in water. | 2 minutes |
| 4 | Soak & Use a Cloth: Depending on the type of plate, you will have to choose your method of cleaning. The cover plates and switch plates can directly soak in a tub of solution. After soaking, rub it with a cloth and dry for half an hour. | 2 minutes |
| 5 | Vacuum or Brush: For the receptacle and concealed electrical box in the wall, you should avoid using water for fear of rust in the metallic receptacle contacts. Gently vacuum the open outlet for detritus. If you do not have a vacuum cleaner, you can use a brush to remove hair, lint, and dust. | 2 minutes |